Faculty

Dr.J.Shanthi

 jsiece@tce.edu

19

PUBLICATIONS       

37

SEMINAR, CONFERENCE, WORKSHOP ATTENDED

 Educational Qualification

DEGREE BRANCH INSTITUTE YEAR
B.E Electronics and Communication Engineering Mepco Schlenk Engineering College 2004
M.E Embedded Systems Technologies. Anna University, Tirunelveli 2010
Ph.D. VLSI-Physical Design Anna University, Chennai 2023

 Experience

PERIOD NO OF YEARS DESIGNATION INSTITUTION
21-07-2004 to 31-05-2005 0.10 Lecturer SACS MAVMM Engineering College, Madurai
20-06-2005 to 31-05-2008 2.11 Lecturer Sethu Institute of Technology, Virudhunagar
02-01-2012 to 30-04-2015 3.4 Assistant Professor Kamaraj College of Engineering
13-01-2016 to 10-07-2017 1.5 Assistant Professor AMC Engineering College, Bangalore
17-01-2019 to 31-07-2022 3.7 Research Fellow - Thiagarajar Research Fellowship Thiagarajar College of Engineering
10-08-2022 to 01-01-0001 2.10 Assistant Professor Thiagarajar College of Engineering

 Publications

 Journals
  1. J.Shanthi, D.Gracia Nirmala Rani, S.Rajaram, An enhanced memetic algorithm using SKB tree representation for fixed-outline and temperature-driven non-slicing floorplanning, Integration, Elsevier, year/vol: 2022/86, Impact Factor: 1.345, SJR: Q3
  2. J.Shanthi, D.Gracia Nirmala Rani, S.Rajaram, A C4.5 decision tree classifier-based floorplanning algorithm for system-on-chip design,Microelectronics Journal, Elsevier,year/vol:2022/121, Impact Factor:1.992, SJR: Q2
  3. J.Shanthi,P.Vimala,High Electron Mobility Transistor-A review on Analytical models,International Journal for Innovative Research in Science and Technology, IF:4.31
  4. J.Shanthi, Vision enabled Mobile Robot using LabVIEW, International Journal of Applied Engineering Research-IJAER,2015/10
 Conferences
  1. 14th international conference on Science and Innovative Engineering (ICSIE’24),Through Silicon Vias in 3D ICs – A reliability Analysis,27th – 28th April’2024,J.Shanthi,M G Subhaharini
  2. Kamaraj International conference on Recent Trends in Science, Enginenring and technology 2024 (KIRSET’2024),Design of Optimized TSV Structures In 3D IC for Mitigating Cross-Talk Induced Delay,16th April 2024,J.Shanthi,Sabithakala Varsha KKarthika S
  3. Development of Machine Learning Model to Detect Fault Data Injection Attack on Vehicle Following Systems,2023 International Conference on Recent Advances in Electrical, Electronics, Ubiquitous Communication, and Computational Intelligence (RAEEUCCI),2023
  4. Thermal Aware Floorplanner for Multi-Layer ICs with Fixed-Outline Constraints,2nd International Conference on Communication, Computing and Industry 4.0 (C2I4), IEEE Explore,
  5. A Novel Machine Learning Based Multi-Objective Memetic Algorithm (ML-MOMA) for 3D IC floorplanning,33rd International Conference on VLSID’2020
  6. Modelling, Simulation and Performance Analysis of CNTFET and MOSFET,VCCN-4AMC Engineering College,Bangalore
  7. Design and analysis of FINFET based SRAM for 45nm technology,VCCN-4AMC Engineering College, Bangalore
  8. Design and Implementation of control area network based vehicle monitoring system,VCCN-4AMC Engineering College, Bangalore
  9. HEMT Exploiting different structures: an overview,National Conference on VLSI, Communication and Computer Networks VCCN-4AMC Engineering College, Bangalore
  10. Object Controlled Through Speech Recognition Using LabVIEW,Anna University, Trichy
  11. Design and development of Pick and Place robot using ARM,Velammal Engineering College, Chennai
  12. Vision Enabled Mobile Robot using LabVIEW,International Conference Recent trends in Information & Communication-ICIC’15 at Christian College of Engineering and Technology, Oddanchatram, Dindigul District, Tamil Nadu
  13. Image Processing Mobile Robot Controller for Pick and Place Operation,KLN College of Information Technology, Madurai.
 Books
  1. J. Shanthi, D.Gracia Nirmala Rani, M.Rajalakshmi, Muthulakshmi,Implementing Secure Machine Learning: A Decision Tree Approach for Smart Grid Stability,IGI- Global
  2. J.Shanthi, D.Gracia Nirmala Rani, S.Rajaram, Book title: Handbook of Research on Emerging Trends and Applications of Machine Learning, Book Chapter: Machine Learning Optimization Techniques for 3D IC Physical Design,IGI-Global,2019.

 Seminar, Conference, Workshop Attended

  1. FDP on VLSI Design Flow ( RTL to GDS-II) conducted by NIELIT, 11-02-2025 to 26-03-2025
  2. ATAL FDP on "The Chronicles of Silicona: Quest for Novel Materials and Enchanted Devices” , 18-11-2024 to 30-11-2024
  3. FDP on "Java Demystified" conducted by Electronics & ICT Academy , C-DAC Hyderabad,, 03-10-2024 to 09-10-2024
  4. FDP on "Digital Circuits" by IIT Kharagpur, 01-07-2024 to 31-10-2024
  5. FDP on Programming in Java -NPTEL,IIT Kharagpur, 01-07-2024 to 31-10-2024
  6. FDP on "Problem Solving through Programming in C" conducted by IIT,MAdras-NPTEL, 01-07-2024 to 31-10-2025
  7. FDP on Recent trends in VLSI and MEMS,IIIT Kottayam, 03-06-2024 to 07-06-2024
  8. Faculty Conclave 2024,TCE, 03-05-2024 to 03-05-2024
  9. Designing E-tivities and DesigningAuthentic Assessments,Thiagarajar College of Engineering, 05-03-2024 to 05-03-2024
  10. The Role of Tutors in Students’ Well-Being,TCE, 24-02-2024 to 24-02-2024
  11. NPTEL – AICTE FDP on Joy of Computing using Python, IIT Madras, 20-01-2024 to 30-04-2024
  12. FDP onImplementation of Image and Speech Processing on FPGA,Dayananda Sagar University, Bengaluru, 20-11-2023 to 24-11-2023
  13. Attended Short-Term Course on "Modern VLSI Design and EDA Tools Hands-on" Organized by the Department of Electronics and Communication Engineering, NATIONAL INSTITUTE OF TECHNOLOGY DELHI., 02-11-2023 to 08-11-2023
  14. Short term Course on Modern VLSI Design and EDA Tools Hands-on,NIT, Delhi, 02-11-2023 to 08-11-2023
  15. Participated IEEE WINTECHCON - Women in Technology Conference- Emerging Technologies from Silicon to Software for a sustainable future in Bengaluru, 21-09-2023 to 21-09-2023
  16. Two day Faculty Development Program on "Innovative with TRIZ : Tools for Creative Problem Solving" Organized by TRIZ Student Association Chapter, TCE., 18-08-2023 to 19-08-2023
  17. A Two day workshop on "Effective Practices of CDIO Framework in OBE Implementation" organized by Academic Process Team from Internal Quality Assurance Cell of TCE., 01-08-2023 to 02-08-2023
  18. TCE Faculty Conclave 2023 - Project Based Learning by synergizing two subjects - conducted by IQAC at Thiagarajar College of Engineering, Madurai, 25-03-2023 to 01-01-0001
  19. Two day Faculty Development Programme- "Life at TCE", 25-08-2022 to 26-08-2022
  20. One day Online Seminar,Online Workshop by Researcher Academy on Campus Elsevier and Amity UniversityEmpowering knowledge on ethical publishing: Mastering the art of identifying predatory, fake and cloned journals , 08-06-2022 to 08-06-2022
  21. International Conference, online ModeVLSID’2022, 26-02-2022 to 02-03-2022
  22. International Conference16th – 17th December 2021CMR Institute of Technology,Bengaluru2nd International Conference on Communication, Computing and Industry 4.0 (C2I4), 16-12-2021 to 17-12-2021
  23. Two Day Online workshop 25th and 26th Nov, 2021Online workshop by Thiagarajar College of EngineeringVLSI Circuits Design and Device Modeling: Recent Trends and Advancements, 25-11-2021 to 26-11-2021
  24. TEQIP-III sponsored one week online short term course,Online workshop by Dr.B.R.Ambedkar National Institute of Technology, JalandharLow Power VLSI Design for Communication Systems and Networks, 16-09-2020 to 20-09-2020
  25. VLSID’2020, International Conference, Leela Palace, Bengaluru, 04-01-2020 to 08-01-2020
  26. Two day Workshop11th & 12th Oct 2019Thiagarajar College of EngineeringCADENCE EDA Workshop: From Schematic to GDS II File Generation, 11-10-2019 to 12-10-2019
  27. TEQIP -III Sponsored two day workshop11th & 12th Sep, 2019Thiagarajar College of EngineeringMachine Learning Algorithms in Big Data Analytics for Engineering Applications, 11-09-2019 to 12-12-2019
  28. Image and Video Processing30th Nov to 1st Dec’2014.Kamaraj College of Engineering and TechnologyMATLABprogramming, 30-11-2014 to 01-12-2014
  29. Mobility Services, Two-week Course,IBM at Kamaraj College of Engineering & Technology., 10-11-2014 to 22-11-2014
  30. Introduction to Robotics31st July to 1st Aug, 2014Sona Engineering College, Salem (Supported by IITB, Mumbai)E-yantra Programme , 31-07-2014 to 01-08-2014
  31. LabVIEW Core-II12th to 15th May, 2014NI Instruments, Bangalore atKamaraj College of Engineering and TechnologyLabVIEW Programming and Interfacing, 12-05-2014 to 15-05-2014
  32. Effective Teaching,6th and 7th Febraury’2014,INSPIRE team at Kamaraj College of Engineering and Technology, 06-02-2014 to 07-02-2014
  33. Faculty Development Programme on Digital Principles and System Design,Anna University, Madurai, 11-12-2013 to 17-12-2013
  34. Communicative English,Col’s CALIBRE, Coimbatore at Kamaraj College of Engineering & Technology., 18-11-2013 to 30-11-2013
  35. LabVIEW Core-I18th June 2012 to 22nd June 2012,NI Instruments, Bangalore at Kamaraj College of Engineering and Technology, 18-06-2012 to 22-06-2012
  36. Five Day Training Programme on LabVIEW core 1 & 2 ,Kamaraj College of Engineering & Technology, Virudhunagar, 18-06-2012 to 22-07-2012
  37. Faculty Development Programme on Electro Magnetic Field Theory25th May-1st June’2012Sethu Institute of Technology, Madurai, 25-05-2012 to 01-06-2012

 Seminar, Conference, Workshop Organised

  1. A Two Day Workshop on VLSI Design using System Verilog,Thaigarajar College of Engineering,Madurai, 24-03-2023 to 25-03-2023
  2. A Two Day Faculty Development Program on VLSI Design – Universal Verification Methodology (UVM),Thaigarajar College of Engineering,Madurai, 23-09-2022 to 24-09-2022

 Lectures Delivered

TOPIC DELIVERED AT PERIOD
Embedded system design using ARM CORTEX M4 AMC Engineering College, Bangalore 05-05-2017 to 06-05-2017
Embedded system design using ARM CORTEX M4 AMC Engineering College, Bangalore 21-04-2017 to 22-04-2017
Embedded system design using ARM CORTEX M4 AMC Engineering College, Bangalore 07-04-2017 to 08-04-2017
Embedded system design using ARM CORTEX M4 AMC Engineering College, Bangalore 07-04-2017 to 08-04-2017
Industrial Automation National level Colloquium ENXENEIRO’14, Department of Mechanical Engineering at Kamaraj College of Engineering & Technology. 17-10-2014 to 17-10-2017
Embedded system design Kamaraj College of Engineering & Technology 01-09-2014 to 03-09-2014
Design of Embedded systems using RTOS. Kamaraj College of Engineering & Technology 21-04-2014 to 22-04-2014

  Awards and Honours

  1. Python Powered Digital Circuits Design , in Faculty Conclave’2024
  2. Project based learning by synergizing two domains, Faculty Conclave
  3. Publication of quality research papers in Q1/Q2/Q3 SCImago Journal ranking 2022, Appreciation Certificate at Faculty Conclave

 Membership

NAME OF SOCIETY DETAILS PERIOD
ISTE LM86895

  Other Achievements

  1. NPTEL - Problem solving through programming in C
  2. NPTEL - Programming in Java
  3. NPTEL - Programming in Java
  4. NPTEL Digital Circuits - Elite
  5. NPTEL Joy of Computing -Elite-Silver
  6. NPTEL Online Certification Python for Data Science, Secured 70% with Elite Grade, Jan-Feb 2022
  7. Received Certificate of Appreciation for the overall performance at Kamaraj College of Engineering and Technology in 2014-15
  8. e-Yantra Robotics Teacher CompetitionCertificate of completionSuccessfully completed the Competition Conducted by IITB, Mumbai
  9. Secured University First Rank in M.E Degree and Received Rank Certificate from Vice Chancellor of Anna University, Tirunelveli, Jan 2012
  10. M.E Degree ExaminationsUniversity First RankReceived Rank Certificate from Vice Chancellor of Anna University, TirunelveliJan 2012
  11. Higher Secondary State Board ExaminationsDistrict First Rank Received award from the Chief minister of Tamil Nadu & Merit Scholarship for UG degreeJuly 2000