Dr.Mahalingam college of Engineering and Technolgy
22-01-2015 to Till date
7 Years & 11 Months
Assistant Professor
Thiagarajar college of Engineering
Publications
Journals
Production of hybrid AgNPs - TEMPO-mediated oxidation cellulose composite from jackfruit peduncle agro-waste and its thermal management application in electronic devices, Elsevier, International Journal of Biological Macromolecules, Volume 254, Part 1, January 2024, 127848
GURUMOORTHY R RAGHAV, R ASHOK KUMAR, KJ NAGARAJAN, CHANDRAN VIGNESH, FELIX SAHAYARAJ AROKIASAMY, EDI SYAFRI "EFFECT OF CELLULOSE NANOFIBERS FROM RED COCONUT PEDUNCLE WASTE AS REINFORCEMENT IN EPOXY COMPOSITE SHEETS" Cellulose Chemistry and Technology 57 (7-8), 855-866
Vignesh Chandran, Chockalingam Kunjan, Velkannan Veerapandian, Ramesh Kannan “Mechanical, corrosion and biological behavior of centrifugal casting processed Mg–2Zn–1Mn alloy reinforced with β Tricalciumphosphate (βTCP) for orthopaedic applications” Journal of the Mechanical Behavior of Biomedical Materials, Volume : 2023, 144, 105, 105983
Conferences
K.A.Arirajan, K.Chockalingam and C.Vignesh"Selection of contact bearing couple materials for hip prosthesis using finite element analysis under static conditions", International conference on Design, materials & manufacturer 2018, AIP conference proceedings 1943,020013(2018); https://doi.org/10.1063/1.5029589
Presented International conference on “FINITE ELEMENT ANALYSIS OF ELECTRICAL MULTIPLE UNIT COACH BOGIE BOLSTER” at NOORUL ISLAM UNIVERSITY NAGERKOIL ,10-04-2012 to 11-04-2012
Books
M.M. Devarajan, G. Kumaraguruparan, K.J. Nagarajan, C. Vignesh "Production of hybrid AgNPs - TEMPO-Mediated Oxidation cellulose composite from jackfruit peduncle agro‐waste and its thermal management application in electronic devices" International Journal of Biological Macromolecules, 254 & 127848, 2023 (Q1 – 1.19, Impact Factor - 8.2)
Seminar, Conference, Workshop Attended
Recent Development in metals and ceramics in orthopaedic implants organized by Karunya Institute of Technology and sciences (Deemed to be university) (Online), 04-06-2020 to 04-06-2020
One week faculty development program on “Advanced NDT techniques & Applications in Industry” organized by Indian society for Non Destructive Testing, Hyderabad Chapter (Online), 25-05-2020 to 29-05-2020
Effective and Efficient Online Teaching in the Age of Corona, A Hands-on workshop organized by Indian Institute of Technology Bombay (Online), 16-05-2020 to 16-05-2020
JCR – South Asia Training & certification Program 2020. organized by Web of science group, 03-03-2020 to 01-01-0001
Two week course on “Digital Transformation in Teaching Learning Process” organized by Indian Institute of Technology Bombay (Online), 14-02-2020 to 06-03-2020
Visionary Learning Community of India (VLCI) Module 3 & 4 organized by M/s. Hartita Seating systems limited, Hosur, 12-07-2019 to 14-07-2019
NPTEL "Two days Lab based course on Medical Biomaterials" at Bio Engineering and Drug design Lab, Department of Bio technology,Indian Institute of Technology, Madras , 14-06-2019 to 15-06-2019
AICTE/MHRD Quality Improvement Programme Sponsored short term course on "Current Status and Requirements of Biomedical Devices" at Indian Institute of Technology, Guwahati, 25-03-2019 to 29-03-2019
Successfully completed One week (Equivalent to Eight Week online course) NPTEL-AICTE sponsored faculty development programme on "Medical Biomaterials" organised by Indian Institute of Technology Madras , 01-02-2019 to 27-04-2019
Successfully completed One week (Equivalent to Eight Week online course) NPTEL-AICTE sponsored faculty development programme on "Friction and wear of materials: principles and case studies" organised by Indian Institute of science Bangalore and Indian Institute of Technology Roorkee, 01-02-2019 to 28-04-2019
AICTE QIP Sponsored one week short term course on ' Design, Manufacturing and characterization of Micro and Nano composites Materials' at Thiagarajar college of Engineering., 30-01-2019 to 05-02-2019
TEQIP Sponsored One-day workshop on "Myths and Realities of R & D and IPR at EEIs : Issues, Challenges & Opportunities" at Thiagarajar college of Engineering, 13-07-2018 to 13-07-2018
TEQIP Sponsored Two weeks Lab based course on "Introduction to Manufacturing Processes" at Indian Institute of Technology Kanpur, 11-06-2018 to 22-06-2018
One day workshop on "Mentoring skills" organized by the counseling cell of Thiagarajar college of Engineering in association with M.S. Chella Muthu Trust and Research Foundation., 10-03-2018 to 10-03-2018
AICTE QIP Sponsored One week Short Term Course (STC) on "Machine Learning Techniques for Manufacturing Optimization"organized by Department of Mechanical Engineering, Thiagarajar College of Engineering, Madurai , 14-12-2017 to 20-12-2017
Two days TEQIP II Sponsored Faculty development program on "Induction and Orientation Program" Organized by Centre for Engineering Education, Thiagarajar College of Engineering, Madurai - 625015, 15-02-2017 to 16-02-2017
TEQIP-II sponsored One day workshop on "Research Paper Writing" at Thiagarajar College of Engineering, 15-09-2016 to 15-09-2016
TEQIP-II Sponsored One week Faculty Development Programme on "Recent Advances in Finite Element Methods to solve complex Engineering Problems" at National Institute of Technology Calicut, 19-07-2016 to 25-07-2016
AICTE approved Four-Week Faculty Development Programme on "Use of ICT in Education for Online and Blended Learning" conducted by Indian Institute of Technology Bombay., 02-05-2016 to 10-07-2016
Two days Hands-on-training on "Finite Element Analysis and Optimization using Hyperworks 13.0" at Dr.Mahalingam college of Engineering and Technolgy, 28-09-2015 to 29-09-2015
Four day TEQIP sponsored Faculty Development Programme on "Engineering Graphics" at Thiagarajar College of Engineering, Madurai - 625 015, 06-07-2015 to 09-07-2015
Two days SPFU-TEQIP II sponsored workshop on "Implementation of Outcome based Education" at Thiagarajar College of Engineering, 21-04-2015 to 22-04-2015
Advanced Faculty Training Program in "Industrial Automation Technolgies" conducted by MCET-BOSCH Rexroth Regional centre of competence at Dr.Mahalingam college of Engineering and Technolgy, 09-06-2014 to 14-06-2014
Two week ISTE Workshop on "Fluid Mechanics" conducted by Indian Institute of Technology Kharagpur, 20-05-2014 to 30-05-2014
Two week ISTE Workshop on "Engineering Mechanics" conducted by Indian Institute of Technology Bombay, 26-11-2013 to 06-12-2013
One day workshop on "Role of NDT & Metallography in Failure Analysis" conducted at Dr.Mahalingam college of Engineering and Technolgy, 06-09-2013 to 06-09-2013
Seminar, Conference, Workshop Organised
Three Days Workshop on “Vibration measuring techniques: Vibration transducers and Vibration signature analysis” Organized by Department of Mechanical Engineering, Thiagarajar College of Engineering, Madurai - 625015, 19-11-2021 to 20-11-2021
Two-day Workshop on “3D Printed Implants and Its Material Characterization”Organized by Department of Mechanical Engineering, Thiagarajar College of Engineering, Madurai - 625015, 10-11-2021 to 12-12-2021
One Day Workshop on “Car Design” in association with Motor Vikatan, Organized by Department of Mechanical Engineering, Thiagarajar College of Engineering, Madurai - 625015, 25-01-2020 to 25-01-2020
One week AICTE QIP Sponsored Short Term Course on "Design, Manufacturing, Analysis of Implants with Bio Materials and its Characterization" Organized by Department of Mechanical Engineering, Thiagarajar College of Engineering, Madurai - 625015, 11-03-2019 to 17-03-2019
One day TEQIP II sponsored workshop on "Digital Manufacturing through 3D Printing" Organized by Department of Mechanical Engineering, Thiagarajar College of Engineering, Madurai jointly with M/s. Design Tech, Chennai., 21-03-2017 to 21-03-2017
Short Term Training Program on “Creo Parametric 2.0” for TCE BE Mechanical and BE Mechatronics Students - One month course (46 hours), 01-03-2017 to 31-03-2017
TEQIP sponsored two days workshop on CREO parametric software for Mechanical department supporting staff.Organized by Department of Mechanical Engineering, Thiagarajar College of Engineering, Madurai , 28-12-2015 to 30-12-2015
