Faculty

Dr.H.Ramesh

 rameshh@tce.edu

26

PUBLICATIONS       

2

CONSULTANCY PROJECTS

3

M.E./Ph.D. SCHOLARS

69

SEMINAR, CONFERENCE, WORKSHOP ATTENDED

 Educational Qualification

DEGREE BRANCH INSTITUTE YEAR
B.E E.E.E Noorul Islam College of Engineering 1997
B.E E.E.E Noorul Islam College of Engineering 1997
MBA Project Management Alagappa University 2010
M.E Applied Electronics Anna university campus 2012
Phd E.E.E,Industrial Servo drives Thiagarajar college of Engineering 2024

 Experience

PERIOD NO OF YEARS DESIGNATION INSTITUTION
01-09-1997 to 30-09-2006 9 years Electrical Engineer India and saudiarabia
01-04-2006 to 31-03-2015 9 years Deputy manager-Training-Mechatronics NTTF,Bangalore

 Publications

 Journals
  1. M Aishwarya, Sri Roophika NS, H Ramesh,"Effect of project-based learning method for improving students problem-solving ability in the experiment of power electronics course"Journal of Engineering Education Transformations,vol.37,2024
  2. H Ramesh, Jeshuran Cornelius K S R, Mohamed ashwaque noor mohamed, Aadhavan P ," Data-driven modelling of linear motion system using learning algorithm" European Chemical Bulletin,13 (Regular Issue 2),24-35
  3. H Ramesh, S Julius Fusic,"Introducing Analysis of Experiments in Electrical Machines Laboratory", Journal of Engineering Education Transformations,vol. 37,spl issue 2,2024.
  4. S Julius Fusic , H Ramesh, "Implementation of an Industrial Automation Remote Lab (IARL) and validation using a deep learning approach during a COVID pandemic", Computer Applications in Engineering Education WILEY in Q1 Journal with IF:2.9 in July 2023. Article DOI: 10.1002/cae.22663
  5. S Julius Fusic , H Ramesh,"Effect of Q-Net Demonstration based educational approach on improving students problem solving skills in the electrical machines course"Journal of Engineering Education Transformations vol.36(2),484-491,2023
  6. Ramesh, H., S. Arockia Edwin Xavier, P. Thangapandian, and N. Anandh. "Predictive Control of Axis Drift in Linear Motion Control Systems." Journal of Scientific & Industrial Research 81, no. 08 (2022): 827-836.
  7. Ramesh, H., and S. Xavier. "Optimal Tuning of Servo Motor Based Linear Motion System Using Optimization Algorithm." Journal of Electrical Engineering & Technology 17, no. 6 (2022): 3565-3580.
  8. S.Julius Fusic, H.Ramesh, P.Divya, S.Madhura Lakshmi, M.Rajaraaman, V.Akshaya, "NON-HOLONOMIC OBSTACLE DETECTION & AVOIDANCE IN MOBILE ROBOT" in ICIEIA'18 and published in UGC approved journal Journal of applied science and computation, DOI no: 16.10089.JASC.2018.V5I6.453459.14416
  9. Non Linear optimum interacting multiple model smoother for GPS navigation system
  10. Anandh N, Akhilesh Sharma, Julius Fusic S, Ramesh H,"An improved zero-voltage zero-current transition boost converter employing l-c-s resonant network" published in International Journal of Power Electronics and Drives System (IJPEDS) scopus indexed, Q2 Journal, SJJR-03. SNIP-0.9 Impact factor- 1.49, Volume 11,issue 4 page no : 1844-1856 DOI : http://doi.org/10.11591/ijpeds.v11.i4.pp1844-1856
 Conferences
  1. H Ramesh, S Julius Fusic, Jeshuran Cornelius KSR, M Sreenidhikamalam, M Aishwarya."Case study on Integrating Legacy Devices in Industry 4.0 framework using OPC UA"2023 International Conference on Energy, Materials and Communication Engineering (ICEMCE)
  2. Vetri Selvan GK, Julius Fusic, H Ramesh,"Advanced control strategies for Servo motors: Analysis of PID, FUZZY-PID and MPC with cuk converter integration",2023 International Conference on Energy, Materials and Communication Engineering (ICEMCE),2023
  3. Ramesh, H., S. Xavier, R. Pradheep Kumar, and S. Julius Fusic. "Case Study on Server–Client Protocols of Industrial Controllers." In Proceedings of First International Conference on Computational Electronics for Wireless Communications, pp. 241-257. Springer, Singapore, 2022.
  4. Ramesh H , Arockia Edwin Xavier S , Muthu Pandi S , Julius Fusic S, AN Subbiah "Prediction of End-Milling optimal Parameters using ANN based NSGA II Model", international conference PRIME-2021,NIT Patna
  5. N.Anandh, H.Rmaesh, S.Julius Fusic, "Optimization of energy storage elements in a cross-connected capacitors boost converter" in 2017 International Conference On Smart Technologies For Smart Nation (SmartTechCon),Bangalore, DOI: 10.1109/SmartTechCon.2017.8358333
  6. S.Julius Fusic, H.Ramesh, P.Divya, S.Madhura Lakshmi, M.Rajaraaman, V.Akshaya, "NON-HOLONOMIC OBSTACLE DETECTION & AVOIDANCE IN MOBILE ROBOT" in ICIEIA'18.
  7. Julius Fusic S, Karthikeyan S, Ramesh H, Subbiah AN, "Vehicle License Plate Detection and Recognition Using Neural Network" in 2020 4th International Conference on Computer, Communication and Signal Processing (ICCCSP), in IEEE Explore on 15.01.2021, Doi.No:10.1109/ICCCSP49186.2020.9315206
  8. International Conference on Industry 4.0 and Advanced manufacturing,IISC,Bangalore
  9. Completed VLCI second module offered by M/s .TAFE ltd ,Madurai
  10. International conference on transformations in Engineering Education in Bennett University ,India
  11. "Multiple model filter based position tracking in CNC machines" 4th international conference on signal processing, communications and networking (ICSCN-17), Anna University, MIT Campus, chennai, March 16-18, 2017
  12. Non linear interacting multiple model smoother for GPS navigation system in International Conference on Mathematical Modelling and applied soft computing organized by CIT coimbatore
  13. Nonlinear optimum filter based interacting multiple model for GPS navigation system
 Books
  1. H Ramesh, SAE Xavier, SM Pandi, SJ Fusic, AN Subbiah "Prediction of End-Milling Optimal Parameters Using ANN-Based NSGA-II Model " Recent trends in Mechanical Engineering Springer Nature Singapore
  2. Industry 4.0-Connected Drives Using OPC UA, book chapter in Industry 4.0 and advanced manufacturing,DOI 978-981-15-5689-0_1, © 2021,Springer
  3. Palaninatharaja M, Julius Fusic S, Ramesh H, Karthikeyan S, "Automated Vision System to Measure Weld Length of Hand Brake" published as book chapter in book: "Advances in Lightweight Materials and Structures" Publisher: SPRINGER, Chapter-17,Chapter DOI- 10.1007/978-981-15-7827-4_17

 Consultancy

NAME OF INDUSTRY DETAILS PERIOD
Ruby Milk Products Design and Engineering Consultancy 19-12-2023 to 29-02-2024
Ruby Milk Products Design Consultancy 04-11-2022 to 03-12-2022

 Seminar, Conference, Workshop Attended

  1. Two Days Hand on FDP on Autodesk Fusion, 03-12-2024 to 04-12-2024
  2. Five days online FDP on Inculcating Universal Human Values in Technical Education, 11-11-2024 to 15-11-2024
  3. 4 weeks NPTEL Course on Intelligent Feed Back and control -Silver Elite, 01-08-2024 to 30-09-2024
  4. 4 Week NPTEL course on Demystifying Networking, 01-07-2024 to 31-08-2024
  5. 4 Weeks NPTEL Course on Experimental Robotics -Gold Elite Top 1 %, 01-02-2024 to 31-03-2024
  6. 12 weeks NPTEL FDP on Introduction to Industry 4.0 and Industrial Internet of Things -Gold Elite TOP 1 %, 01-01-2024 to 30-04-2024
  7. Industry assisted online FDP on Emerging Technologies & Real -World Applications -PALS-IIT chennai, 22-11-2023 to 24-11-2023
  8. Recent advances in control and instrumentation design techniques of robotic systems, 27-10-2023 to 31-10-2023
  9. IoT and its application in Instrumentation, 21-03-2022 to 26-03-2023
  10. Electric cars: Technology -Delft University of Technology using edX, 01-03-2021 to 27-07-2021
  11. Completed eight modules of National initiative of technical teachers training by AICTE-NITTT, 01-02-2021 to 30-09-2021
  12. Hands-on training on MATLAB and Advanced optimization Techniques, 18-01-2021 to 23-01-2021
  13. Short term course on"Micro-Mechatronics and Soft Robotics", 21-12-2020 to 23-12-2020
  14. Short term program on"Open Source Tools for Online Teaching", 12-12-2020 to 16-12-2020
  15. Short Term training program on " Foundational concepts of Robotics", 01-12-2020 to 05-12-2020
  16. Online FDP on Machine Learning, 23-11-2020 to 04-12-2020
  17. The Bodhitree and SAFE tools for effective online teaching :A Hands on workshop-IIT Bombay, 18-06-2020 to 20-06-2020
  18. Effective and Efficient online teaching in the age of corona, A Hands on workshop-IIT Bombay, 22-05-2020 to 24-05-2020
  19. Servo Basics, 01-05-2020 to 18-05-2020
  20. Basic Motion control -Omron, 01-05-2020 to 15-05-2020
  21. Design, Develop and Deliver online courses through MOODLE platform, 23-04-2020 to 24-04-2019
  22. AC drive Basics-OMron, 01-04-2020 to 04-05-2020
  23. Introduction to factory automation-omron, 01-04-2020 to 02-05-2020
  24. one day workshop on CDIO based curriculum Design, 27-08-2019 to 27-08-2019
  25. VLCI 3rd and 4th module training at Harita Seating Systems Limited,Hosur, 12-07-2019 to 14-07-2019
  26. Paper presentation at Ist International Conference on "I4.0 and SMART Manufacturing at IISc ,Bangalore, 28-06-2019 to 29-06-2019
  27. VLCI 1 & 2 Module Training at TAFE, Madurai, 03-05-2019 to 04-05-2019
  28. One week short term course on "Smart supply chain in Industry 4.0:research trends and challenges, 18-03-2019 to 24-03-2019
  29. Two week short term course on application of Soft computing techniques to Electrical Engineering by EEE Dept,TCE, 24-01-2019 to 06-02-2019
  30. One week Aicte-Qip sponsored fdp on "Embedded system design with open source hardware and software , 17-12-2018 to 23-12-2018
  31. Completed Ist module of Visionary Learning Community of India training programme in KLS Gogte Institute of Technology , 08-09-2018 to 10-09-2018
  32. One week Train The Trainer program on SINUMERIK OPERATE-TURNING At Technology and Application Center ,Bangalore, 23-04-2018 to 27-04-2018
  33. one day workshop on "Mentoring skills" offered by M.S.Chella muthu trust and research foundation, 10-03-2018 to 10-03-2018
  34. One week short term course on "research opportunities and challenges in robotics, 19-02-2018 to 25-02-2018
  35. One day training on "Robotic Process Automation -vi path" by CTS,Coimbatore., 21-10-2017 to 21-10-2017
  36. One day workshop on "Lean Six Sigma" , 07-09-2017 to 07-09-2017
  37. IUCEE-EPICS DESIGN THINKING COURSE,PURDUE UNIVERSITY,USA, 01-08-2017 to 31-01-2018
  38. One day workshop on "Digital Manufacturing through 3D printing", 21-03-2017 to 21-03-2017
  39. Three day workshop on "Linear algebra for Researchers and Engineers", 02-03-2017 to 04-03-2017
  40. One day workshop on" Modelling of Engineering system using Bond graph, 20-02-2017 to 20-02-2017
  41. Two day STP on "Applied Sensor Technologies", 17-02-2017 to 17-02-2017
  42. industrial training on PLC and Sensors at Bosch Rexroth Mysore, 05-12-2016 to 09-12-2016
  43. one day workshop on "Standard Operating procedures for TCE", 22-11-2016 to 22-11-2016
  44. One day workshop on "ICT tools for Engineering Education", 09-11-2016 to 09-11-2016
  45. Two days Workshop on "International accreditation and program Assessment", 04-11-2016 to 05-11-2016
  46. One day workshop on "Ethics for Engineers and Engineering teachers", 06-08-2016 to 06-08-2016
  47. Five days training on Automation Technology by Bosch Rexroth bangalore, 01-08-2016 to 05-08-2016
  48. Two days workshop on industrial automation by M/s.Yokogawa India Ltd, 08-01-2016 to 09-01-2016
  49. Foundation skills in Integrated product development organised by anna university and NASSCOM, 27-09-2015 to 01-10-2015
  50. Four day Teqip sponsored FDP on Engineering Graphics , 06-07-2015 to 09-07-2015
  51. Two days training on "process automation using DCS" by PSG college of Technology coimbatore, 06-07-2012 to 07-07-2012
  52. one day workshop on "State Estimation & Multisensor Data Fusion for Engineering applications", 10-03-2012 to 10-03-2012
  53. Three days training on "S7-200 PLC" by Siemens Ltd ,Bangalore, 11-09-2007 to 13-09-2007
  54. International conference on computational electronics for wireless communications,NIT,kurukshetra,11-12,June 2021, 01-01-0001 to 01-01-0001
  55. Completed course on Electrical vehicles in coursera., 01-01-0001 to 01-01-0001
  56. FDP on "Opportunity and Challenges for Electric Vehicles in the Automotive Industry”26-07-2021 to 30-07-2021,NIT,Srinagar, 01-01-0001 to 01-01-0001
  57. Successfully completed 3 days workshop on "How teachers can Make a difference' by IIT Madras from 19.01.2021 to 21.01.2021, 01-01-0001 to 01-01-0001
  58. Successfully completed one week FDP on Deep learning organized by IIT Bombay from 26.12.2020 to 30.12.2020, 01-01-0001 to 01-01-0001
  59. Successfully completed one week course on foundational concepts of Industrial robotics organized by IIT Roorkee from 01.12.2020 to 05.12.2020 , 01-01-0001 to 01-01-0001
  60. Successfully completed 2 weeks FDP on Machine learning organized by IIT kanpur from 23.11.2020 to 04.12.2020, 01-01-0001 to 01-01-0001
  61. FDP on “ELECTRIC TRANSPORTATION INFRASTRUCTURE FOR E-MOBILITY IN INDIA” 02-08-2021 to 06-08-2021,NIT ,warangal, 01-01-0001 to 01-01-0001
  62. FDP on Electrical vehicles 07-06-2021 to 11-06-2021 ,NIT,Trichy, 01-01-0001 to 01-01-0001
  63. Successfully completed TEQIP FDP on "Micro mechatronics and soft robotics" Indian Institute of Technology Indore,, 21-12-2020 to 23-12-2020, 01-01-0001 to 01-01-0001
  64. Successfully completed 5 days TEQIP FDP on "Open Source Tools for Online Teaching" Indian Institute of Technology Roorkee,, 12-12-2020 to 16-12-2020, 01-01-0001 to 01-01-0001
  65. Deep learning:from Basics to practice,IIT Bombay,26-30 December 2020, 01-01-0001 to 01-01-0001
  66. Online course on AI/ML for Geodata Analysis by ISRO during 19 Aug 2024 to 23 Aug 2024, 01-01-0001 to 01-01-0001
  67. Completed course on "Effective and Efficient Online Teaching in the Age of Corona, A Hands On Workshop" organised by IIT,Bombay, 22-05-2020 to 24-05-2020, 01-01-0001 to 01-01-0001
  68. Successfully completed on-line workshop on "The BodhiTree and SAFE Tools for Effective Online Teaching: A Hands-On",IIT Bombay, 18-06-2020 to 20-06-2020, 01-01-0001 to 01-01-0001
  69. International conference on progressive research in industrial and mechanical engineering (PRIME-2021)-5 to7 august 2021,NIT,Patna., 01-01-0001 to 01-01-0001

 Seminar, Conference, Workshop Organised

  1. Tamil Nadu state Govt sponsored FDP on "Industry 4.0 Compatible Robotics and Automation" , 21-08-2023 to 25-08-2023
  2. FDP on Machine learning approaches for Engineering Applications-in association with Robotic Society of India, 25-03-2022 to 26-03-2022
  3. FDP on Design of Experiments, 21-12-2021 to 23-12-2021
  4. One week short term training program on Industrial Automation, 17-12-2019 to 21-12-2019
  5. Workshop Cum competition on "Industrial Pneumatics & Hydraulics", 21-09-2019 to 22-09-2019
  6. Teqip-III sponsred5days faculty Development program on "Robotics and Automation", 17-06-2019 to 21-06-2019
  7. Two days FDP on "CNC programming using Siemens controller", 15-03-2018 to 16-03-2018
  8. One day FDP on "Motion control using CRIO", 27-02-2018 to 27-02-2018
  9. Two weeks AICTE-QIP sponsored Short term course on "Industrial Automation", 20-11-2017 to 03-12-2017
  10. Two days workshop cum competition on Industrial Pneumatics and hydraulics in association with M/s.Bosch Rexroth,Bangalore, 06-10-2017 to 07-10-2017
  11. Two days workshop on Industrial automation jointly with Bosch Rexroth,Bangalore, 24-09-2016 to 25-09-2016
  12. 2 days workshop on Industrial automation using PLC and SCADA, 09-09-2016 to 10-09-2016
  13. 8 Days Workshop on Industrial automation for the employees of M/s TAFE and M/s. Fenner,Madurai , 05-02-2016 to 27-02-2016
  14. Five day TEQIP sponsored workshop on"Industrial automation using PLC", 11-05-2015 to 15-05-2015
  15. FDP on Machine learning for Engineering Applications ,25-26 March 2022, 01-01-0001 to 01-01-0001

 M.E./Ph.D. Scholars

NAME OF SCHOLAR COURSE AREA OF RESEARCH STATUS
S Muthu Pandi M.E/M.S A comparative study of neural networks and anfis for forecasting the surface roughness in CNC machines Completed
C Vaishnavi M.E/M.S Sensorless control of BLDC motor using unscented kalman filter Completed
S Barath Kumar M.E/M.S Multiple model filter based position tracking in CNC machines Completed

 Lectures Delivered

TOPIC DELIVERED AT PERIOD
Electrical drives and its control in EV applications GCT-Coimbatore 09-10-2023 to 09-10-2023
PLC Pneumatic interfacing using Automation studio GCT,Coimbatore 23-08-2023 to 23-08-2023
PLC interfacing on Electro and Proportional Hydraulics AICTE – ISTE INDUCTION/REFRESHER PROGRAMME on “ADVANCEMENT OF PNEUMATICS & HYDRAULICS” 24-12-2021 to 24-12-2021
PLC interfacing on Electro and Proportional Hydraulics AICTE – ISTE INDUCTION/REFRESHER PROGRAMME on “ADVANCEMENT OF PNEUMATICS & HYDRAULICS” 24-12-2021 to 24-12-2021
PLC architecture and programming TARC,TCE 18-06-2019 to 18-06-2019

 Membership

NAME OF SOCIETY DETAILS PERIOD
AMIE Member
IET Member
AMIE Member

  Other Achievements

  1. DOTE Member of Course "Diplomo in Mechatronics"
  2. DOTE Member of Course "Diplomo in Robotics and Autoamtion"