Faculty

Dr.K.Chockalingam

 kcmech@tce.edu

42

PUBLICATIONS       

3

SPONSORED PROJECTS

2

CONSULTANCY PROJECTS

6

M.E./Ph.D. SCHOLARS

1

SEMINAR, CONFERENCE, WORKSHOP ATTENDED

 Educational Qualification

DEGREE BRANCH INSTITUTE YEAR
B.E MECH P.S.N.A.COLLEGE 1989
M.B.A MARKETING TSM 1994
M.E PRODUCTION Thiagarajar College of Engineering 1999
Ph.D MECH M.K.U 2007

 Experience

PERIOD NO OF YEARS DESIGNATION INSTITUTION
1992-1994 2 LECTURER MAVMM
1989-1992 3 In Industry Vinir Forging, LG auto Equipment
01-12-1994 to 30-11-2007 13 ASSISTANT PROFESSOR Thiagarajar College of Engineering
01-12-2010 to Till date 11 PROFESSOR Thiagarajar College of Engineering
01-12-2007 to 30-11-2010 3 ASSOCIATE PROFESSOR Thiagarajar College of Engineering

 Publications

 Journals
  1. Vignesh Chandran, Chockalingam Kunjan, Velkannan Veerapandian, Ramesh Kannan “Mechanical, corrosion and biological behavior of centrifugal casting processed Mg–2Zn–1Mn alloy reinforced with β Tricalciumphosphate (βTCP) for orthopaedic applications” Journal of the Mechanical Behavior of Biomedical Materials, Volume : 2023, 144, 105, 105983
  2. Development of comfort fit lower limb prosthesis by reverse engineering and rapid prototyping methods and validated with gait analysisK Chockalingam, N Jawahar, N Muralidharan, K BalachandarInternational Journal of Biomedical Engineering and Technology 35 (4), 362-381
  3. Optimization of CNC-WEDM parameters for AA2024/ZrB2 in situ stir cast composites using response surface methodology with desirability function techniqueN Muralidharan, K Chockalingam, R Parameshwaran, K Kalaiselvan, ...Arabian Journal for Science and Engineering 45 (7), 5563-5579
  4. Influence of circumferential curve shapes and surface options on curve length and volume of axisymmetric components in modelling for reverse engineering applicationsD Sangupandy, K Chockalingam, M Ramesh, V AnbumalarJournal of the Chinese Institute of Engineers 42 (2), 149-159
  5. Material subtraction study of AISI T-15-HSS by wire cut electrical discharge machining (CNC-wire cut EDM) based on Taguchi grey relational analysisK Chockalingam, N Jawahar, N Muralidharan, KL JeyarajInternational Journal of Machining and Machinability of Materials
  6. Impact of post processing parameter on mechanical properties and surface roughness of selective laser sintered sand mold casting partIV Arasu, K ChockalingamNISCAIR-CSIR, India
  7. Development of thermal and structural deformation model to predict the part build dimensional error in fused deposition modelingK Chockalingam, M Karthic, N JawaharADMT Journal 11 (2), 27-37
  8. Microstructure and mechanical behavior of AA2024 aluminum matrix composites reinforced with in situ synthesized ZrB2 particlesN Muralidharan, K Chockalingam, I Dinaharan, K KalaiselvanJournal of Alloys and Compounds 735, 2167-2174
  9. Development of Process Model for Optimal Selection of Process Parameters for Geometric Tolerances and Surface Roughness in StereolithographyC KunjanADMT Journal 9 (3), 103-113
  10. "Influence Of Fdm Process Parameters On Part Deformation And Its Comparision With 3d Fea Simulation"M Karthic, K Chockalingam, N Jawahar
  11. K. Chockalingam, N. Jawahar,K.L.Jeyaraj,C.Kesavasubramanian,R.G. Bharathwaj, Optimization of CNC wire EDM process parameters and establishment of polynomial process model for multiple performance characteristics, ELIXIR Mechanical Engineering,Vol. No.50. (2012) 10420-10433
  12. K. Chockalingam, I.Vijay Arasu,Optimization of surface roughness in selective laser sintered stainless steel parts , Int. Jrl of Chem Tech Research,Vol.6, No. 5,2014, pp.2993-2999
  13. K. Chockalingam, Gopala Krishnan S,N. Jawahar, Optimization Studies in CNC Wire Cut EDM: A Review, ELIXIR Mechanical Engineering, Vol. No. 95 pp. 40808-40832,2016
  14. K.Chockalingam, N.Jawahar, J.Praveen, Enhancement of anisotropic strength of fused deposited ABS parts by Genetic Algorithm, Materials and Manufacturing processes, Accepted for publication.
  15. K.Chockalingam, N. Jawahar, U. Chandrasekhar, J.Praveen & M.Karthic Development of process model for optimal selection of process parameters for geometric tolerances and surface roughness in stereolithography, Int. Jrl. ofAdvanced Design and Manufacturing Technology, Accepted for publication
  16. Optimization studies in CNC wire cut EDM: a review K Chockalingam, S Gopala Krishnan, N Jawahar Elixir Mech Eng 95, 40808
  17. K. ChockalingamM,N. Jawahar,P. Prasad ,U. Chandrasekhar Influence of Layer Thickness on Mechanical Properties in stereolithography,Int. Jrl. Of Rapid prototyping, Emerald Science Volume12, No 2, 2006, Page No.106- 113
  18. K. Chockalingam, N. Jawahar,U. Chandrasekhar,K.N. Ramanathan, Establishment of process model for part strength in stereolithography, Int. Jrl of Materials processing technology208 (2008) 348-365
  19. K. Chockalingam N. Jawahar KN.Ramanathan P.S.Banerjee Optimization Of Stereolithography Process Parameters For Part Strength Using Design Of Experiments,International Journal of Advanced Manufacturing Technology, UK.Vol 29, 2006, pp 79 – 88
  20. Optimization of CNC wire EDM process parameters and establishment of polynomial process model for multiple performance characteristics, K. Chockalingam,N. Jawahar, K.L.Jeyaraj,C.Kesavasubramanian,R.G. Bharathwaj, ELIXIR Mechanical Engineering, Vol. No.50. (2012) 10420-10433
  21. Internet based E- Manufacturing of prototypes for one –off intricate casting by using Rapid prototyping Technology, Raju. B.SU. Chandrasekhar,D.N.Drakshayani,K. Chockalingam, Int. Jrl of Applied Engineering Research,Vol.5 Number 20 (2010) pp.3357-3365
  22. Determining the influence of layer thickness for rapid prototyping with stereolithography (SLA) process BS Raju, U Chandrashekar, DN Drakshayani, K Chockalingam International Journal of Engineering Science and Technology 2 (7), 3199-3205
  23. Sridevi, Sridevi, K.Chockalingam, N.Jawahar, C.Muruganantham, Sridevi, Orthogonal array based Regression equation for accuracy of vision camera calibration, Journal Of Manufacturing Technology and Management, IIPE, B’lore, Jan March 2009, 3-9
  24. U.ChandraSekar, K.Chockalingam, N.Jawahar, U.ChandraSekar, Influence of Layer Thickness on Mechanical Properties in Stereolithography process, Rapid Prototyping Journal (Emerald), Vol.12, No.2, 2006, 106-113
  25. K.Chockalingam, N.Jawahar, KN.Ramanathan, KN.Ramanathan, P.S.Bannerjee, P.S.Bannerjee, Optimisation of Stereolithography Process parameters for part strength using Design of Experiments, Int. Journal of Advanced Manufacturing Technology, UK., , Vol 29, 2006, 79-88
  26. P.Prasad, K.Chockalingam, N.Jawahar, P.Prasad, U.Chandrasekar, U.Chandrasekar, A process model for Dimensional Accuracy in Stereolithography, Journal Of Manufacturing Technology and Management, IIPE, B’lore, 2006, 45-55
  27. K.Chockalingam.,M.Karthic., and N.Jawahar "Development of Thermal and Structural Deformation Model to Predict the Part Build Dimensional Error in Fused Deposition Modeling" 2018, Vol. 11, Issue 2, PP. 27-37.
  28. K. Chockalingam, Raju. B.S,U. ChandrasekharD.N.Drakshayani, Determining the influence of layer thickness for rapid prototyping with Stereography (SLA) Process, Int. Jrl of Engineering Science and Technology,Vol.2(7),2010,3199-3205
 Conferences
  1. K.A.Arirajan, K.Chockalingam and C.Vignesh"Selection of contact bearing couple materials for hip prosthesis using finite element analysis under static conditions", International conference on Design, materials & manufacturer 2018, AIP conference proceedings 1943,020013(2018); https://doi.org/10.1063/1.5029589
  2. R. Rajeshshyam, K. Chockalingam, V. Gayathiri and T. Prakash., "Reduction of metallosis in hip implant using thin film coating"., International Conference on Design, materials & manufacturer 2018, AIP conference proceedings 1943, 020090 (2018); doi: 10.1063/1.5029666
  3. Development of residual limb surface using reverse engineering and rapid prototyping, N.Muralidharan, M.KumaresanK. Chockalingam, National conference on Emerging Trends in Engineering and Technology (ETET’11) April 20th and 21st 2011 at Anna University of Technology, Madurai, In souvenir pp34
  4. Opimisation of milling machine process parameters using grey based taguchi method for multiple performance charecterics,G.Navakodi, K.Chockalingam, International Conference on Modeling and simulation, August 2007 at CIT, Coimbatore, IN CD
  5. Enhancement of reverse engineered 3D Model features through the integration of contact and non contact scanned dataM.Kumaresan,N.Muralidharan,K. Chockalingam, National conference on Emerging Trends in Engineering and Technology (ETET’11) April 20th and 21st 2011 at Anna University of Technology, Madurai ,In souvenir pp33
  6. U.Chandrasekar, K.Chockalingam, N.Jawahar, U.Chandrasekar, A process model for form feature accuracy in stereolithography, Int. Conf. & Exhibition on Total Engineering, Analysis & manufacturing Technologies, 4-6 Sep, 2007, IISC, Bangalore, 4-6, Sep 2007
  7. N.Jawahar, K.Chockalingam, P.Pakeer Mohaideen, P.Prasad, P.Prasad, P.Pakeer Mohaideen, Evolution of Coefficients of SL Process-Error Relationships, 21st All India Manufacturing Technology, Design and Research Conference AMTDR, VIT, Vellore, 632 044., 20th to 22nd Dec, 2004
  8. S.Madhu Bhartwaj, K.Chockalingam, N.Jawahar, S.Madhu Bhartwaj, Influence of Layer Thickness on Mechanical Properties in Stereolithography, Int. Conf. on CAD, CAM, robotics and automation, (INCARF 2003), 11 13 Aug 2003, IIT Delhi, INDIA., 11-13, Aug 2003
  9. K.Chockalingam, E.R.Vijay Babu, E.R.Vijay Babu, M.Jeeva, N.Jawahar, M.Jeeva, Neural Network Genetic algorithm Approach for Optimal Process Parameters in Stereolithography process, Int. Conf. on Operations Research for development (ICORD 2002), Dec 27-30, Anna University, Chennai, India., p.42 (CC05 in CD)
  10. K.Chockalingam, N.Jawahar, E.R.Vijay Babu, E.R.Vijay Babu, Optimization of process parameters in Stereolithography using genetic algorithm, Int. Conf. on Smart Materials, Smart Structures and Systems 15- 17th Dec 2002 (ISSS-SPIE 2002) at IISc Bangalore. India, 368-375
  11. K.Chockalingam, N.Jawahar, R.Balaji, R.Balaji, A Genetic algorithm for prediction of error in stereolithography, Int. Conf. on E-manufacturing: An Emerging need for 21st Century world class Enterprises, Nov 17 19 Nov 2002, Bhopal, India., 192-199
  12. A.Sivasubramaniam, A.Sivasubramaniam, K.Chockalingam, N.Jawahar, A GA for Single Point Turning Under Multiple Priority Goals, A National Seminar on Soft Computing and its Engineering Applications, JNV University, Jodhpur, 15-17, Feb 2002
  13. N.Jawahar, P.Manimaran, P.Manimaran, K.Chockalingam, N.Balaji, N.Balaji, A Simulated Annealing Technique for Customer Distribution Networks in Supply Chains, A National Seminar on recent trends in Production/Operations Management, Annamalai University, Jan 19-20, 2001
  14. K.Chockalingam, N.Jawahar, C.Rajendran, C.Rajendran, A GA based sequencing method for optimal inventory in a mixed model assembly line, 19th AIMTDR Conf., IIT, Madras, Chennai. , Dec 14 16 , 2000

 Projects

TITLE SPONSORING AGENCY AMOUNT RESPONSIBILITY
Modernization of Internal Combustion Engines Laboratory MODROB Rs. 1100000 Coordinator
DEVELOPMENT OF PROCESS MODELS FOR QUANTIZATION OF PROCESS PARAMETERS TO ACHIEVE DESIRED PERFORMANCE CHARACTERISTICS IN WIRE EDM PROCESS AICTE-RPS Rs .20,00,000 Principal investigator
DEVELOPMENT OF FAST, ACCURATE AND EFFICIENT ALGORITHM FOR REVERSE ENGINEERING AICTE-RPS Rs.9,00,000 Principal Investigator

 Consultancy

NAME OF INDUSTRY DETAILS PERIOD
TTSL Radom building 01-03-2015 to 01-04-2015
Aruna Machine Tools Casting validation 01-08-2008 to 01-08-2009

 Seminar, Conference, Workshop Attended

  1. TeamTech 2007, Conference, BEST PAPER AWARD

 Seminar, Conference, Workshop Organised

  1. One day workshop on rapid proto typing in 2002., 01-01-0001 to 01-01-0001
  2. Conference on theory and practice of Operational Research and Information Technology in Supply Chain Management,,Thiagarajar College of Engineering, Madurai,September 2007, 01-01-0001 to 01-01-0001
  3. International . conference on Operational Research for Urban and Rural Development and 43rd ORSI annual convention,Thiagarajar College of Engineering & ORSI Madurai Chapter,, 01-01-0001 to 01-01-0001
  4. Perceptual orientation program - Module I for I year batch 2011-12 , 01-01-0001 to 01-01-0001
  5. Mission 10x Advance workshop on Faculty empowerment , 01-01-0001 to 01-01-0001
  6. Perceptual orientation program - Module II for I year batch 2011-12, 01-01-0001 to 01-01-0001
  7. Mission 10X Faculty empowerment workshop 2011, 01-01-0001 to 01-01-0001

 M.E./Ph.D. Scholars

NAME OF SCHOLAR COURSE AREA OF RESEARCH STATUS
Mr. Vijayy Arasu Ph.D Rapid Proto Typing Completed
Mr. Sangu pandi Ph.D Reverse Engineering Completed
N.Muralidharan Ph.D Opimisation Completed
Mr. T. Prakash Ph.D Bio corrosion Ongoing
Mr.C. Vignesh Ph.D Bio mechanics Ongoing
Mr. M. Karthic Ph.D Biomaterials Ongoing

 Membership

NAME OF SOCIETY DETAILS PERIOD
ISTE LIFE MEMBER
ORSI LIFE MENBER
Institution of Engineers FELLOW MEMBER