Faculty

S.Arunkumar

 sakmech@tce.edu

29

PUBLICATIONS       

1

CONSULTANCY PROJECTS

5

SEMINAR, CONFERENCE, WORKSHOP ATTENDED

 Educational Qualification

DEGREE BRANCH INSTITUTE YEAR
B.E Production Engineering Sethu Institute of Technology 2008
M.E Engineering Design St.Peter's University 2011
Ph.D Composite Materials Anna University 2022

 Experience

PERIOD NO OF YEARS DESIGNATION INSTITUTION
01-06-2012 to 30-06-2022 10 years Assistant Professor R.M.K College of Engineering and Technology
01-06-2011 to 31-05-2012 1 year Assistant Professor Magna College of Engineering
01-05-2008 to 15-09-2009 1.5 year Assistant Professor Magna College of Engineering

 Publications

 Journals
  1. B Chidambaranathan, G Soundararajan, AK Rajendran, A Sakthivel, ... International Journal on Interactive Design and Manufacturing (IJIDeM) 19 Effect of geometric profile linearisation of wind turbine blades in low wind regions
  2. S Arunkumar, R Ashok Kumar, C Bibin, G Soundararajan Surface Review and Letters, 2550087 ENHANCEMENT OF ALUMINUM ALLOY (AL7075) COMPOSITE BY THE ADDITION OF CRS PARTICLE VIA STIR CASTING TECHNIQUE
  3. B Chidambaranathan, S Raghavan, G Soundararajan, S Arunkumar, ... Automotive Technical Papers 369401 Review of Mechanical Properties of Basalt Fibre-Reinforced Polymer Composites for Automotive Applications
  4. K Rajesh, C Bibin, G Soundararajan, R Ashok Kumar, S Arunkumar, ... Scientific Reports 14 (1), 13228 Investigating the impact of alumina nanoparticles in coconut oil distillate biodiesel to lessen emissions in direct injection diesel engine
  5. K Rajesh, B Chidambaranathan, S Raghavan, R Ashok Kumar, ... Automotive Technical Papers 358710 Development and Analysis of Hybrid Electric Two-Wheeler for City Driving
  6. N.Aravindhan, ChidambaranathanBibin, R.Ashok Kumar, KollaSai Kalyan, KonukuruSai Balaji, R.Kugan, K.Rajesh, S.Arunkumar, “Performance analysis of various types of ducted wind turbines – A review”, Materials Today Proceedings, https://doi.org/10.1016/j.matpr.2022.11.240
  7. S Arunkumar, AS Kumar, Studies on egg shell and SiC reinforced hybrid metal matrix composite for tribological applications, Silicon (2022), https://doi.org/10.1007/s12633-021- 00965-0
  8. S Arun Kumar, R Ashok Kumar, CP Deric Mario Tony, R Badrinath, “Design and deformation analysis of multi-spindle drilling head parts”, AIP Conference Proceedings, 2446, 180035 (2022), https://doi.org/10.1063/5.0110488
  9. S.Arunkumar, “Physical and mechanical characterization of Al7075/Si3N4 metal matrix composite prepared by stir casting technique”, Materials Today Proceedings, https://doi.org/10.1016/j.matpr.2022.11.096
  10. S. Arun Kumar, and N. Sadasivan, “Analysing the Effect of Fixture on Manual Welding Application”, Recent Advances in Mechanical Engineering, pp 455–464https://doi.org/10.1007/978-981-19-2188-9_42
  11. R. Ashok Kumar,S. Arunkumar, Gowtham Devanand, K. Dasari, Naga Sai Srivatsav, and S. Dhamodharan , "A comprehensive review on fabrication techniques and corrosion behavior on metal matrix composites", AIP Conference Proceedings 2393, 020014 (2022) https://doi.org/10.1063/5.0074274.
  12. R. Ashok Kumar, M. S. Sujithkumar, P. Vikram, S. Arunkumar, S. Tamil Selvan, and G. Sai Sharan , "A review on tribological behaviour of aluminium metal matrix composites", AIP Conference Proceedings 2393, 020006 (2022) https://doi.org/10.1063/5.0079693.
  13. K Rajesh, MP Natarajan, PK Devan, S Ponnuvel, V Dillibabu, ... Recent Advances in Energy Technologies: Select Proceedings of ICEMT 2021 Effect of intake air preheat on diesel engine performance fueled with coconut fatty acid distillate biodiesel
  14. S Arunkumar, A review on aluminium matrix composite with various reinforcement particles and their behaviour, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2020.05.053S.
  15. S Arunkumar, R Ashokkumar, MS Sundaram, KM SukethKanna, ... Materials Today: Proceedings 33, 570-577 Optimization of wear behaviour of Al7075 hybrid metal matrix composites using Taguchi approach
  16. R. Ashok Kumar. R, S.J. Akash, S. Arunkumar, V. Balaji, M. Balamurugan, Fabrication and Corrosion Behaviour of Aluminium Metal Matrix Composites – A Review, 923 (2020) 1–10. https://doi.org/10.1088/1757-899X/923/1/012056.
  17. R. Ashok Kumar, A. Devaraju, S. Arunkumar, Experimental Investigation on Mechanical Behaviour and Wear Parameters of TiC and Graphite Reinforced Aluminium Hybrid Composites,Mater.TodayProc.5(2018)14244–14251.https://doi.org/10.1016/j.matpr.2018.03.005.
 Conferences
  1. Hybrid Organic Silica-Lithium/Zinc Polymeric Surface Coating on Al 7075: Corrosion Behavior under Saline condition National Research Conclave - Thiagarajar College of Engineering
  2. A Review on Composite Materials Reinforcing with Organic/Natural Materials”, Fourth International Conference on Advancements in Research and Development
  3. A Review of Preparation and Characterization of Sol-Gel coating for Corrosion Mitigation”, Fourth International Conference on Advancements in Research and Development.
  4. Fabrication method of Aluminium metal matrix composites: A Review” (BEST PAPER AWARD), Fourth International Conference on Advancements in Research and Development
  5. Presented a paper titled " Hardness test on Aluminium based composites" in National Conference on " Emerging trends in Mechanical Engineering" on 16th March 2017.
  6. Presented paper titled " An Investigation of Mechanical Behaviour of Al7075 with Al2o3" in National Conference on " Emerging trends in Mechanical Engineering" on 16th March 2017
  7. Presented paper titled " A Review of Mechanical properties of Stir Cast Aluminium Matrix Composites" in National Conference on " Emerging trends in Mechanical Engineering" on 16th March 2017.
  8. Presented a paper titled " A review on Triological behaviour of Al7075 composite materials "in National Conference on "Fascinating Advancements in Mechanical Engineering" on 7th March 2016.
  9. Presented a paper titled "Investigation of Squeeze Casting Al-SiC Metal Matirx Composites" in National Conference "NCRTME2013" on 6th September 2013.
  10. Presented a paper titled "Design, Analysis of Robot Arm for Inspection of Hazardous storage tank" in International Conference "ICMEET -2K11" on 11th & 12th April 2011.
  11. Presented a paper titled " Design and Analysis of Wind Blades" in National conference on " Recent Advances & Challenges in Mechanical & Mechatronics Engineering" on 18th March 2011.
 Books
  1. Thermal Engineering Basics (ISBN NO : 978-81-975640-4-8), REST Publisher, India.

 Consultancy

NAME OF INDUSTRY DETAILS PERIOD
Urban service Ltd, Canada Rs.2,86,800 21-02-2025 to 21-02-2025

 Seminar, Conference, Workshop Attended

  1. Inculcating Universal Human Values in Technical Education -(AICTE), 28-04-2025 to 30-04-2025
  2. IUCEE Felder Brent, Effective Teaching and Learning Coure, 01-07-2024 to 30-06-2025
  3. AAKRUTI GlOBAL 2024 Design Contest - Solidworks, 01-03-2024 to 05-03-2024
  4. ADVANCES IN MATERIALS TECHNOLOGY FOR NEXT GENERATION MANUFACTURING, 01-02-2024 to 05-02-2024
  5. ADDITIVE MANUFACTURING ADVANCEMENTS IN DIFFERENT APPLICATIONS [AMADA – 23], 26-12-2023 to 31-12-2023

 Seminar, Conference, Workshop Organised

  1. Three days Workshop on Advancements in Ceramic matrix composites and Metal matrix Composites, 16-04-2024 to 18-04-2024
  2. Workshop on “Mobile Robots and its Applications”, 15-03-2024 to 15-03-2024
  3. Seminar Organized on “Air Conditioning in India”, 09-10-2023 to 09-10-2023

 Membership

NAME OF SOCIETY DETAILS PERIOD
ISTE Indian Soceity of Technical Education 01-06-2013 to Lifetime

  Other Achievements

  1. NPTEL - DISCIPLINE STAR
  2. NPTEL - MOTIVATED LEARNER
  3. NPTEL - DOMAIN SCHOLAR (PRODUCT DESIGN)