Dr.V.Balasubramani

vbmech@tce.edu

Educational Qualification

DEGREE BRANCH INSTITUTE YEAR
B.E. Mechnical Engg National Engg College , Kovilpatti 1996
M.E. Engineering Design Govt.College Of Tech, Coimbatore 2001
Ph.D Mechanical Engineering Anna University, Chennai-25 2015

Experience

PERIOD NO OF YEARS DESIGNATION INSTITUTION
17.02.1997- 16.08.1999 2 years 5 months Lecturer in Mechnaical K.L.N.College of Engg, Madurai
01.10.2000- 06.11.2001 1 year Lecturer K.L.N.College of Engineering, Madurai
07.11.2001-06.11.2006 5 years Lecturer Thiagarajar Coleege Of Engg, Madurai-15
07-11-2006 to 23-08-2011 04 years 9months Senior Grade Lecturer Thiagarajar Collge Of Engg, Madurai-15
24-08-2011 to Till date 03 years 11 months Assistant Professor Thiagarajar College of Engineering, Madurai-625015

Journals

  1. Balasubramani V, Nikhila R, Alice Nila M, Numerical prediction of interlaminar stresses in laminated composites, IOP Conf. Series: Materials Science and Engineering 402 (2018) 012121
  2. V.Balasubramani, A. Arunkumar, T. Muthumani, Flow analysis of Butterfly valve for effective Exhaust Braking system, International Journal of Applied Engineering Research, 2015ISSN 0973-4562, vol. 10, No.77, pp. 340-343
  3. A.Arunkumar, T. Muthumani,V. Balasubramani, Design and fabrication of anti roll back system in vehicles using ratchet and pawl mechanism, International Journal of Emerging Technology in Computer Science & Electronics,(IJETCSE), 2015ISSN:0976-1353,vol. 12, no.3, pp. 6-9
  4. Joseph Leo.A. , Arut Pranesh.K. , Balasubramani,V,Structural analysis of crane hookInternational Journal of Emerging Technology in Computer Science & Electronics (IJETCSE),2015,ISSN: 0976-1353, vol. 12, no.3, pp. 42-46
  5. A.Roys Jeyangel, M.Babu, V.Balasubramani,Design and kinematic analysis of gear powered scissor liftInternational Journal of Emerging Technology in Computer Science & Electronics (IJETCSE)2015ISSN:0976-1353,vol.12, no.3,pp. 42-46
  6. Balasubramani.V & Rajendra Boopathy,S, Prediction of Residual Tensile Strength of Laminated Composite Plates after Low Velocity Impact, ARPN Journal of Engineering and Applied Sciences, 2014vol. 9, no. 3, pp. 320 -325
  7. Balasubramani, V,Rajendra Boopathy, S,Venkatesh, M & Kalaikovan, Fiber Damage Prediction of Laminated Composite Plates under Impact loading using ANSYS, International Journal of Decision Making in Supply Chain and Logistics, 2013vol.3, no. 2, pp. 159-172
  8. Balasubramani.V , Rajendra Boopathy, S & Vasudevan R, Numerical Analysis of Low Velocity Impact on Laminated Composite Plates, Procedia Engineering, 2013,vol.64, pp. 1089-1098

Conferences

  1. V Balasubramani, A Joseph Leo, K Ramesh Kumar Drop weight impact response of hybrid composite laminates, International conference on Green Technologies for Energy Management, Mohamed Sathak Engineering College,Kilakarai - 623 806,Tamil Nadu, 27 & 28th March 2015.
  2. S. Vishnu, S. Santhosh, V. Balasubramani, M. Senthil Kumar ,Analysis and Simulation of Steady State Cornering in Four Wheelers, International Colloquium on Materials Manufacturing and Metrology (ICMMM 2014) Indian Institute of Technology Madras,Chennai, August 8-9 2014,
  3. R. Diwakar, R. Jeevanantham, V. Balasubramani and S. Rajendra Boopathy, Static analysis of Hybrid riveted lap joint with adhesives, August 8-9 2014, International Colloquium on Materials Manufacturing and Metrology (ICMMM 2014) Indian Institute of Technology Madras,Chennai, August 8-9 2014,
  4. S.Bivin Savio, P.Velmurugan, V. Balasubramani, Thermal analysis of radial flow turbocharger turbine, International Conference on Engineering Innovations and Solutions (ICEIS –2016), CMS College of Engineering, Namakkal , India pp 192-196
  5. R.Keshor Kumar, T. Dharun Velmani, V. Balasubramani, Numerical Prediction of Fatigue Life of Crankshaft, International Conference on Innovations in Engineering and Technology (ICIET) - 2016 ,K.L.N. College of Engineering, July 2016,pp 73-81
  6. V Balasubramani, A Joseph Leo, K Ramesh Kumar Drop weight impact response of hybrid composite laminates, International conference on Green Technologies for Energy Management, Mohamed Sathak Engineering College,Kilakarai - 623 806,Tamil Nadu, 27 & 28th March 2015,
  7. V. Balasubramani, S .Rajendra Boopathy “PREDICTION OF RESIDUAL STRENGTH OF LAMINATED COMPOSITE PLATES AFTER IMPACT USING ANSYS", Second International Conference on Advances in Materials Processing and CharacterizationAMPC 2013, Department of Mechanical Engineering, Anna University, Chennai-600 025,6th -8th February 2013.
  8. V.Balasubramani ,S. Rajendra Boopathy,C.Magesh ,"Laminate strength analysis of composite materials using MATLAB", International Conference Advances Mechanical, Manufacturing and Building Sciences, VIT University, Vellore, January 9-11, 2012
  9. V.Balasubramani ,S. Rajendra Boopathy, M.Venkatesh, K.KalaiKovan , " Fibre damage Prediction of Laminated under Impact Loading using ANSYS", International Confernce on simulation Modeling and Analysis , Amirta School of Engineering, Amirta Vishwa Vidyapeetham, Ettimadai, Coimbatore, India, December 14-16,2011
  10. V.Balasubramani , S. Rajendra Boopathy, P.Athikesavan, M.Vinoth Kumar, Failure analysis of Composite materials using MATLAB, Fourth National Conference on Optimization Techniques in Engineering Sciences and Technologies, Bannari Amman Institute of Technology, Sathyamangalam, March 27-28, 2009.
  11. V.Balasubramani , S. Rajendra Boopathy, P.Athikesavan, M.Vinoth Kumar , " Failure analysis of Composite materials using MATLAB ", at International Conference on Stochastic Modeling, Alagappa University, Karaikudi-03, February 12-14, 2009
  12. V.Balasubramani , S. Rajendra Boopathy, " Finite Element analysis of Poppet Valve guides in Internal Combustion Engines "National Conference on Low Carbon Technologies, 2009, Annamalai University, February 27-28,2009
  13. V. Balasubramani , M.SuriyaNarayanan ,T.MuthuMuniyandi , " Design analysis of High Contact Ratio Spur Gear Pairs" National Conference on Computational Methods in Mechanical Engineering, Osmania University, Hydrebad, 2005
  14. V. Balasubramani , T. Sornakumar, P.K. Palani , " Design analysis of Addendum Modified Spur Gear Pairs ", First National Conference on Advances in Manufacturing Technology in the Era of Globalisation at Pune Institute of Engineering and Technology, Pune.

Industry Interactions

COMPANY NAME NATURE OF WORK PERIOD DETAILS
IFB Industries Ltd, Goa Stability of Washing machines are studied with different loading conditions. 01-08-2008 to 31-05-2010 Consultancy Work

Consultancy

NAME OF INDUSTRY DETAILS PERIOD
Engineering & Business Analytics India Private Limited, Bangalore Experimental determination of centre of gravity and moment of inertia 01-06-2015 to 31-05-2016
IFB Industries Ltd, Goa Improvisation of Stability of Washing Machines 01-08-2008 to 31-05-2010
SAMEER, Chennai Design and Development of Multi Leaf Collimator 01-08-2008 to 31-08-2010

Seminar, Conference, Workshop Attended

  1. Presented Paper at International Conference on Engineering Innovations and Solutions at CMS College of Engineering, Namakkal, India, 22-04-2016 to 22-04-2016
  2. Attended 12th Management Capacity Enhancement Program at at IIM, Kozhikode, 24-08-2015 to 29-08-2015
  3. Participated in the International Conference on Green Technologies for Energy Management (ICGTEM 15) at Mohamed Sathak Engineering College, Kilakari, 27-03-2015 to 28-03-2015
  4. Presented a Paper in the International Conference on Emerging and Recent Technology (ICERT 15) at Sri Rajarajan College of Engineering and Technology, Karaikudi, 31-01-2015 to 31-01-2015
  5. Two days Training on Introduction to DOE and Robust Design at Ansys Software Limited, Bangalore, 16-10-2014 to 17-10-2014
  6. Participated International Colloquium on Materials, Manufacturing and Metrology at Indian Institute of Technology madtas, Chennai, 08-08-2014 to 09-08-2014
  7. Presented a Paper in the International Conference on Trends in Product Life Cycle , Modeling, Simulation and Synthesis at VIT University, Vellore , 06-01-2014 to 08-01-2014
  8. Workshop on Advanced Finite Element Analysis at Indian Institute of Technology, Chennai, 22-12-2013 to 24-12-2013
  9. TEQIP sponsored workshop on Outcome based education at Thiagarajar College of Engineering, Madurai-625015, 22-10-2013 to 23-10-2013
  10. One week ISTE Coordinators Workshop on Engineering Mechanics at IIT Bombay, mumbai , 16-09-2013 to 20-09-2013
  11. Faculty Development Training Programme for TEQIP II Institutions on ME -2151 Engineering mechanics at Anna University Chennai-600025 , 15-07-2013 to 19-07-2013
  12. One day workshop on " R& D project Proposals -Awareness, Needs and Benefits" at Centre for Technology and Knowledge and Transfer, Anna University, Chennai -600 025 , 28-06-2013 to 28-06-2013
  13. One day workshop on “R&D Project Proposals – Awareness, Needs and Benefits” at Centre for Technology Development and Transfer(CTDT), Anna University, Chennai-600 025., 28-06-2013 to 28-06-2013
  14. Workshop on Online PSG Design Data Portal at PSG College of Technology, Coimbatore, 23-12-2011 to 23-12-2011
  15. Processing and Applications of Composite Materials at Indian Institute of Technology Madras, Chennai-600 036, 26-08-2011 to 28-08-2011
  16. Five Day Workshop on “Finite Element analysis: Concepts and Applications ” at School of Mechanical and Building sciences, VIT University, Vellore-632 104, 26-05-2008 to 30-05-2008
  17. One –Day Faculty Development Programme on “ Four Year Curricula and how to raise the bar of Competency for students” at Thiagarajar College of Engineering, Madurai, 30-11-2007 to 30-11-2007
  18. Short-term course on “Smart Materials and Structures ” at Thiagarajar College of Engineering, Madurai, 10-09-2007 to 14-09-2007
  19. TCS Sponsored 2-day Faculty Development Programme on “ SDLC and Project Management –Best Practices” at Thiagarajar College of Engineering, Madurai, 27-07-2007 to 28-07-2007
  20. Faculty Development Programme on “ Finite Element Analysis” at College of Engineering, Guindy,Anna University, Chennai-600 025, 11-06-2007 to 23-06-2007
  21. AICTE Sponsored STTP course on “ Modern Experimental techniques in Mechanics of fluids and Solids ” at Indian Institute of Technology, Kanpur , INDIA., 07-05-2007 to 11-05-2007
  22. AICTE Faculty Development Programme on “ Fundamentals of Nano science and technology ” at Anna University, Chennai-600 025, 18-01-2007 to 31-01-2007
  23. STTP Course on “Applications of CAD/CAE/CAE and IT in Product Development and Discrete Manufacturing” at PSG College of Technology, Coimbatore , 06-11-2005 to 19-11-2005
  24. Short term course on “ Instructional Design and Methodology” at Thiagarajar College of Engineering, Madurai conducted by National Institute of Technical Teachers Training and Research, Chennai. , 01-11-2004 to 06-11-2004
  25. STTP Course on Research Methodology at Indian Institute of Technology Madras, Chennai-600 036, 18-12-2003 to 24-12-2003

Seminar, Conference, Workshop Organised

  1. AICTE -QIP Sponsored One Week Short Term course on "Design , Manufacturing and Characterization of Micro and Nano Composite Materials ", 30-01-2019 to 05-02-2019
  2. Two-week ISTE workshop on Engineering Mechanics organised by Indian Institute of Technology Bombay, Mumbai at Thiagarajar College of Engineering, Madurai, 26-11-2013 to 06-12-2013
  3. Short term course on ANSYS Level I at Thiagarajar College of Engineering, Madurai-15, 23-08-2007 to 20-09-2007
  4. One day work shop on Entrepreneurship awareness at Thiagarajar College of Engineering, Madurai-625015, 30-01-2002 to 30-01-2002

Lectures Delivered

TOPIC DELIVERED AT PERIOD
Design of Machine Elements KLN College of Engineering, Madurai-625015 07-06-2018 to 07-06-2018
Vibration Sensors Thiagarajar College of Engineering, Madurai-625015 10-03-2018 to 10-03-2018
Low Velocity Impact Analysis of composite laminates Alagappa Chettiar Government College of Engineering and Technology, Karaikudi-630003 20-02-2018 to 20-02-2018
All India Seminar on Mechanics , Design and Testing of Composites KLN College of Engineering,Sivaganagi Dt 04-01-2018 to 05-01-2018
Formulation of Finite Element Formulation of two dimensional elements PSNA College of Engineering and Technology, Dindigul 25-11-2017 to 25-11-2017
Design of Helical and Bevel Gears Velammal College of Engineering and Technology, Madurai 23-11-2017 to 23-11-2017
Design of Mechanical Systems Srividhya College of Engineering and Technology, Virudhunagar 14-09-2017 to 14-09-2017
Design of Flywheels AAA College of Engineering and Technology, Amatur, sivakasi 18-08-2017 to 18-08-2017
Kinematics of Machines Alagappa Chettiar College of Engineering and Technology, Karaikudi 03-11-2016 to 03-11-2016
Design of machine Elements PSNA College of Engineering and Technology , Dindigul 04-07-2014 to 04-07-2014
Finite Element Method Kamaraj College of Engineering and Technology, Virudhunagar 05-12-2013 to 05-12-2013
Design of transmission systems K.L.N. College of Engineering, Pottapalayam. 18-03-2011 to 18-03-2011
Design of Machine Elements LVS- IIT Finishing school, Maduari 07-07-2009 to 25-09-2009
Strength of materials LVS- IIT Finishing school, Maduari 20-01-2009 to 27-03-2009
Finite Element Method Honey well Technology Solutions Lab Pvt. Ltd,TCE Campus, Madurai-625015 01-10-2008 to 28-11-2008
Strength Of Materials LVS- IIT Finishing school, Maduari 01-08-2008 to 19-12-2008
Finite Element Method Trichy Engineering College, Trichy 17-11-2007 to 17-11-2007
Inaugural Address in Mechanical Engineering association Latha Mathavan Polytechnic, Kidaripatti, AlagarKoil,Madurai 14-09-2007 to 14-09-2007
Advanced Strength of Materials Honey well Technology Solutions Lab Pvt. Ltd,TCE Campus, Madurai-625015 01-02-2005 to 28-02-2005